CLEAR WAX
SKU:
CA$45.00
22
45
CA$22.00 - CA$45.00
Unavailable
per item
4OZ $19.47+ 13%HST = $22 13.5OZ $34.51+ 13%HST = $39
YOU MUST PURCHASE SHIPPING SEPARATELY
Aspire's wax is a care product that creates a dirt and dust resistant, anti-static seal to help keep surfaces protected and cleaner longer. Use for care and maintenance of furniture, floors and other interior architectural surfaces.
The surface to be waxed must be dry, clean, and free of contaminants. If using Aspire wax on latex or acrylic based paints they must be completely cured before applying this wax. Surfaces must be clean, free of grease, absorbent and dry. Apply in a thin and even manner with any brush or a lint-free cloth. After four hours, buff surfaces with a dry, lint-free cloth, or use a machine buffer. If needed, apply an additional coat, allow to dry and buff. An additional buffing can take place within two to four days after the initial buffing and will increase the durability of the surface.
Coverage: Approximately 150 to 200 square feet per 0.40 liter. On previously waxed and over very smooth surfaces the coverage may be higher.
Drying Time: 12-24 hours between coats, depending on climate, temperature and humidity. Product is fully cured after two to three weeks.
Storage: Unused contents should be kept in a well-sealed container in a cool, dry place. Do not store near heat or open flame. Dispose of excess by drying the contents out and in accordance with local, state and federal ordinances.
Ingredients: beeswax, linseed oil, orange peel oil, isoaliphatics, carnauba wax, larch resin, essential oils, and lead-free dryers (zircon and cobalt octoat)., Eco-Friendly Soft smooth great smelling natural wax!
YOU MUST PURCHASE SHIPPING SEPARATELY
Aspire's wax is a care product that creates a dirt and dust resistant, anti-static seal to help keep surfaces protected and cleaner longer. Use for care and maintenance of furniture, floors and other interior architectural surfaces.
The surface to be waxed must be dry, clean, and free of contaminants. If using Aspire wax on latex or acrylic based paints they must be completely cured before applying this wax. Surfaces must be clean, free of grease, absorbent and dry. Apply in a thin and even manner with any brush or a lint-free cloth. After four hours, buff surfaces with a dry, lint-free cloth, or use a machine buffer. If needed, apply an additional coat, allow to dry and buff. An additional buffing can take place within two to four days after the initial buffing and will increase the durability of the surface.
Coverage: Approximately 150 to 200 square feet per 0.40 liter. On previously waxed and over very smooth surfaces the coverage may be higher.
Drying Time: 12-24 hours between coats, depending on climate, temperature and humidity. Product is fully cured after two to three weeks.
Storage: Unused contents should be kept in a well-sealed container in a cool, dry place. Do not store near heat or open flame. Dispose of excess by drying the contents out and in accordance with local, state and federal ordinances.
Ingredients: beeswax, linseed oil, orange peel oil, isoaliphatics, carnauba wax, larch resin, essential oils, and lead-free dryers (zircon and cobalt octoat)., Eco-Friendly Soft smooth great smelling natural wax!